Suitability of ignition source “exploding wire” for determination of dust explosion characteristics in the 20-L-sphere

Several safety characteristics of dusts are determined in the 20-L-sphere (also known as SIWEK Chamber) according to international standards. Dust cloud ignition is carried out using pyrotechnical igniters. Due to various disadvantages of such igniters the need for alternative ignition sources arises again and again. An alternative could be an ignition source which is known as “exploding wire” or “fuse wire”. The paper presents test results of a comparative study between both ignition sources for the determination of the safety characteristics “Maximum Explosion Pressure” and “Maximum Rate of Explosion Pressure Rise” of five selected dusts in the 20-L-sphere. In addition to that the ignition mechanisms of both ignition sources were analyzed by high speed camera recordings and the ignition energy was determined with electric and calorimetric recordings. The paper shows results of measurements of the ignition energy of both ignition sources as well as sequences of the flame propagation.     

Empirical Comparison of Temperature-Distribution Models for Energy and Exergy Analyses of Stratified Thermal Energy Storages

Five previously developed temperature-distribution models are compared using data from actual thermal energy storage (TES) systems, and the advantages and disadvantages of each model are identified. These models are used for evaluating the energy and exergy in a TES. Furthermore, the accuracy and simplicity of the temperature-distribution models (Linear, Stepped, Continuous-linear, Three-zone and General-linear) are compared in order to determine which model has the greatest accuracy and simplicity regarding computational effort, while providing physical understanding. After fitting the models to temperature data for 35 stratified TES samples, it was observed that some models are easy to use but relatively inaccurate, while others are relatively accurate but complicated to use. As a trade-off, the Three-zone model provides physical understanding, yields acceptable accuracy and is relatively simple to use, especially in computing the parameters needed for energy and exergy assessments of stratified TESs.     

Sorption of 4-n-nonylphenol, 4-n-octylphenol,and 4-tert-octyphenol on cyclodextrin polymers

Environmental Science and Pollution Research - Alkylphenols are industrial pollutants commonly present in wastewater. They are difficult to eliminate by conventional treatment processes, ending up...     

Time profile of abamectin and doramectin excretion and degradation in sheep faeces

We studied abamectin and doramectin excretion and their degradation in sheep faeces under field conditions on pasture after a single subcutaneous dose (0.2mg/kg body weight). In the excretion experiment, maximal abamectin concentration (1277 ng/g dry faeces) was detected on day 3, while doramectin concentration showed two peaks (2186 and 1780 ng/g dry faeces on days 2 and 5, respectively). Both avermectins were excreted at approximately the same rate (k=0.23 day(-1) for abamectin and 0.19 day(-1) for doramectin). In the field, a rapid loss of abamectin and doramectin from sheep faeces was seen during the first 32 days after which concentrations remained constant at approximately 77 ng/g and 300 ng/g, respectively. The half life values (DT(50)) for abamectin and doramectin dissipation from sheep faeces were 23 and 22 days, respectively, during the first 32 days. Dissipation of both avermectins was strongly correlated with moisture content of the faeces.     

Bioavailability assessment and environmental fate of polycyclic aromatic hydrocarbons in biostimulated creosote-contaminated soil

When hydrocarbon-contaminated soil is subjected to bioremediation technology, hydrocarbon depletion is typically marked by an initially rapid reduction rate. This rate decreases over time and frequently a residual concentration remains in the soil. This kinetic has been attributed primarily to the enrichment of more recalcitrant fractions, as well as to the lack of resting hydrocarbon bioavailability. Thus, at the end of the bioremediation process, a part of the residual hydrocarbon soil concentration represents the non-bioavailable fraction, which is difficult to degrade by microbial populations and which poses a minor hazard. Therefore, determination of the bioavailable fraction in a bioremediation project represents both an estimation of the maximum level of achievable biodegradation, as well as an additional indication of the environmental health hazard. In the present study, aged creosote-contaminated soil was subjected to biostimulation processes, and the bioavailable fraction for several target polycyclic aromatic hydrocarbons (PAHs) was calculated using a mild extraction with cyclodextrines. The amount of PAH extracted corresponded to the desorbing fraction and can be regarded as the bioavailable fraction. The non-desorbing fraction data obtained from this procedure were compared to the remaining PAH concentrations following bioremediation treatment of soil microcosms. These results permitted the establishment of a theoretical biodegradation limit based on the desorbing fraction. In addition, neither accumulation of intermediate metabolites, nor the formation of bound-residues or reduced acute toxicity was observed.     

Critique of "Precipitation in light extinction reconstruction" by P.A. Ryan

The goal of the Regional Haze Rule (RHR) is to return visibility in class I areas (CIAs) to natural levels, excluding weather-related events, by 2064. Whereas visibility, the seeing of scenic vistas, is a near instantaneous and sight-path-dependent phenomenon, reasonable progress toward the RHR goal is assessed by tracking the incremental changes in 5-yr average visibility. Visibility is assessed using a haze metric estimated from 24-hr average aerosol measurements that are made at one location representative of the CIA. It is assumed that, over the 5-yr average, the aerosol loadings and relative humidity along all of the site paths are the same and can be estimated from the 24-hr measurements. It is further assumed that any time a site path may be obscured by weather (e.g., clouds and precipitation), there are other site paths within the CIA that are not. Therefore, when calculating the haze metric, sampling days are not filtered for weather conditions. This assumption was tested by examining precipitation data from multiple monitors for four CIAs. It is shown that, in general, precipitation did not concurrently occur at all monitors for a CIA, and precipitation typically occurred 3-8 hr or less in a day. In a recent paper in this journal, Ryan asserts that the haze metric should include contributions from precipitation and conducted a quantitative assessment incorrectly based on the assumption that the Optec NGN-2 nephelometer measurements include the effects of precipitation. However, these instruments are programmed to shut down during rain events, and any data logged are in error. He further assumes that precipitation occurs as often on the haziest days as the clearest days and that precipitation light scattering (bprecip) is independent of geographic location and applied an average bprecip derived for Great Smoky Mountains to diverse locations including the Grand Canyon. Both of these assumptions are shown to be in error.     

Characterization of H+ and Cd2+ binding properties of the bacterial exopolysaccharides

The proton and Cd binding capacities of microbially produced exopolysaccharides, EPS, were quantified by the determination of stability constants and the concentration of complexing sites using H(+) or Cd(2+) selective electrodes in dynamic titrations. The influence of ionic strength, pH and the Cd to EPS ratio was evaluated over large concentration ranges. The applicability of the non-ideal competitive adsorption isotherm combined with a Donnan electrostatics approach was tested with respect to the EPS. Proton and cadmium binding data were compared with literature data examining other ubiquitous environmental ligands including humic substances, alginate, bacteria, etc. Subsequent modelling of Cd speciation in aquatic (fresh and marine waters) and soil systems suggested that the exopolysaccharides would play non-negligible role, under most conditions. The quantitative information provided in this paper thus represents an important advance in our understanding of Cd transport, bioavailability and impact in aquatic and terrestrial systems.     

MULTIPLE CRITERIA SCREENING OF A LARGE WATER POLICY SUBSET SELECTION PROBLEM1

ABSTRACT: A new screening approach is applied to a large‐scale multiple criteria water management problem to remove actions that cannot possibly be in the best subset. An inherent advantage of the approach is its ability to identify inferior actions by examining them individually, rather than within subsets. In a case study involving the selection of actions to address high water levels in the Great Lakes‐St. Lawrence Basin, two statistical indicators, the mode and the mean, are used to aggregate the opinions of experts and representatives of interest groups on the impacts of actions according to various criteria. Application of the screening approach shows that some of the proposed actions can be removed as they can never be in the optimal subset, thereby reducing the size of the problem.     

Innovative technologies to remove alkylphenols from wastewater: a review

Environmental Chemistry Letters - Alkylphenols and alkylphenol polyethoxylates are emerging hazardous contaminants due in particular to their endocrine-disrupting properties. These compounds...     

Removal of emerging contaminants from wastewater using advanced treatments. A review

Environmental Chemistry Letters - The rise of emerging contaminants in waters challenges the scientific community and water treatment stakeholders to design remediation techniques that are simple,...